2x Pressure Ratio High Flow Air Booster Valve

The air pressure booster pump is suitable for working environments where the original air compression system requires increased pressure. It can double the air pressure of the working system, using only the compressed air from the working system as the air source. Air pressure boosting is only suitable for single air source pressurization. I: Usage Scenarios: The pressure in factory air circuits is typically not higher than 1.0 MPa. Therefore, the booster pump can be used to provide a small amount of localized high-pressure gas in the following situations: 1. When individual or partial devices in the air circuit require high pressure. 2. When the main factory air circuit pressure drops, the booster pump can provide high-pressure gas to maintain the normal operation of pneumatic devices. 3. When it is not possible to configure large-diameter cylinders, but output force is still required. 4. For pneumatically controlled remote operations, pressurization is necessary to compensate for pressure loss. 5. When there is a need to increase the hydraulic pressure of联动 cylinders. 6. When it is desired to shorten the time required to fill a gas tank to a certain pressure. II: Application Range: Pneumatic control valves, pneumatic actuators, coordinate measuring machines, pneumatic marking machines, CNC machine tool clamping devices, pneumatic strapping machines, inkjet printers, and situations where cylinder clamping force is insufficient. III: Advantages: 1. Stable pressure, minimal pulsation: The pump produces minimal pulsation and provides stable pressure output. The output pressure value can be adjusted within the allowable pressure range of the working environment using an additional pressure reducing valve. 2. Low noise, low investment cost, energy saving: Compared to high-pressure air compressor systems and high-pressure compressors, this machine operates with low noise and requires lower investment costs. When the set pressure is reached, there is no additional energy consumption, resulting in low energy usage and energy savings. 3. Easy installation and use: Simply connect the drive air inlet, the gas inlet to be pressurized, and the outlet for the pressurized gas to start operation. The pressure of the gas to be pressurized can be steplessly adjusted by regulating the drive air source pressure.